How to Maintain Aluminum Alloy Doors and Windows

Views : 641
Author : Scottie Wang
Update time : 2022-03-28 09:58:16

How to maintain aluminum alloy doors and windows?

 

1. Daily use. When aluminum alloy doors and windows are in use, the action should be light, and the push and pull should be natural. When it is found that the push-pull is blocked, do not use force blindly. Troubleshoot the fault and check whether there is dust accumulation or deformation. If deformation is found, you should seek professional help.

 

2. Clean. Door frames and window frames should be kept clean, especially the sliding grooves. The dust accumulation in the groove and the top of the door seal can be removed with a vacuum cleaner. When cleaning aluminum alloy doors and windows, people should not step on the aluminum frame or pull the frame for support, which will lead deformation or damage to the frame. In cleaning, you can choose to use a soft cloth dipped in water or neutral detergent, do not use ordinary soap and washing powder, and do not use strong acid-base cleaners such as decontamination powder, toilet detergent, etc., which will corrode the finish of doors and windows and the aluminum itself, causing damage to the surface.

 

3. Keep lubricating. Check it frequently and add lubricating oil regularly to keep it clean and flexible. After the chute is used for a long time, the friction force will increase. You can add a little oil or apply a layer of paraffin oil to keep the push and pull smooth. After the rainy day, the wet glass and door and window frames should be wiped dry in time, and special attention should be paid to dry the water in the chute.

 

4. Check the parts regularly. The connection parts of the aluminum alloy frame should be checked regularly, the bolts should be tightened in time, and the damaged parts should be replaced. Positioning shaft pins, wind braces, floor springs, etc. are the vulnerable parts of aluminum alloy doors and windows, which need to be paid more attention. The sealing tops and glass seals are the key structures to ensure the sealing and insulation of doors and windows. If they fall off, they should be repaired and replaced in time.

 

5. Check the frame regularly. The junction of the aluminum alloy frame and wall should be checked regularly. If it is loose, it is easy to deform the frame, so that the doors and windows cannot be closed and sealed. Therefore, the loose screws at the connection should be tightened immediately. If the screw bases are loose, they should be sealed with epoxy super glue and a small amount of cement.

 

Aojinfan specializes in the production of various types of aluminum doors and windows, welcome to contact us.